Maintenance of the Diesel Engine
There are three ways to maintenance of diesel engine.
1.Maintenance in daily storage.
- Check engine oil are in the proper level.
- Check fuel injector of the pump set.
- Check cooling water in the radiator.
- Check joint thoroughly to make sure that they're in normal condition.
- Clean the dirt on the surface of the engine.
2.Maintenance after 100 hours operation.
- Clean and replace the oil filter.
- Clean and replace the fuel filter.
- Check the tension cylinder head cover bolts and tighten it to regulated position.
- Check value clearnance and adjust it.
- Check the tension of the belt.
- Clean the inside of exhaust .
3.Maintenance after 500 hours operation.
- Check the injection pressure of the fuel injectors.
- Check the fuel supply advance angle and adjust it if it is required.
- Check the sealing condition.
- Retighten the connector bolts, the main bearing-cove bolts and the flywheel bolts.
- Retighten cylinder head bolts adjust value cleanance as regulation.
- Replace the lub . Oil in the fuel injection pump.
- Check crank shaftseal and replace it if it worn out.
- Clean oil passage.
- Make a whole check for the engine and do some adjustment if neccessary.
1.Maintenance in daily storage.
- Check engine oil are in the proper level.
- Check fuel injector of the pump set.
- Check cooling water in the radiator.
- Check joint thoroughly to make sure that they're in normal condition.
- Clean the dirt on the surface of the engine.
2.Maintenance after 100 hours operation.
- Clean and replace the oil filter.
- Clean and replace the fuel filter.
- Check the tension cylinder head cover bolts and tighten it to regulated position.
- Check value clearnance and adjust it.
- Check the tension of the belt.
- Clean the inside of exhaust .
3.Maintenance after 500 hours operation.
- Check the injection pressure of the fuel injectors.
- Check the fuel supply advance angle and adjust it if it is required.
- Check the sealing condition.
- Retighten the connector bolts, the main bearing-cove bolts and the flywheel bolts.
- Retighten cylinder head bolts adjust value cleanance as regulation.
- Replace the lub . Oil in the fuel injection pump.
- Check crank shaftseal and replace it if it worn out.
- Clean oil passage.
- Make a whole check for the engine and do some adjustment if neccessary.